Product Data Sheet Show all documents

SikaRapid®-800 P

Hardening Accelerator

SikaRapid®-800 P is a hardening accelerator in powder form for cementitious dry mortar and concrete. SikaRapid®-800 P develops after a few hours very high strengths.

  • Good strength development even below 10°C
  • Adjustable workability time 10 – 50 min
  • Small gap between the beginning and end of the setting
Safety Data Sheet
Product Data Sheet Show all documents

Usage

SikaRapid®-800 P is especially suitable for any application where high early strength development plays a major role, or is of crucial importance within the first hours. SikaRapid®-800 P is used but is not limited for the following applications:
  • rapid setting fixing mortars and grouts for fast loading
  • precast elements for early demoulding and fast removal
  • fast setting foam mortar
  • fast setting tile adhesive
  • fast setting post fix dry mortar
 

Advantages

SikaRapid®-800 P provides the following advantages through accelerated hardening of mortar / concrete within 20 min to 2 hours depending on mix design, fresh mortar temperature and curing conditions:
  • workability time 10 – 15 min
  • end of hardening 15-18 min
  • aprrox. 25 MPa after 24 h at 20°C in concrete
  • good strength development even below 10°C
  • adjustable workability with retarder up to 1 hour
SikaRapid®-800 P does not contain chlorides, nitrates or any other ingredients which promote the corrosion of steel. It is therefore suitable for use in reinforced and prestressed concrete structures.

Packaging

25 kg bag, 40 bags/pallet

Colour

light grey powder

Product Details

Product Information

Composition

Compound of anorganic components

Shelf life

12 months shelf life from date of production if stored in dry conditions in undamaged, unopened, original sealed packaging.

Storage conditions

Dry storage at temperatures up to +30°C. Protect from direct sunlight.

Bulk Density

Approx. 0.75 g/cm³

pH-Value

Approx. 12.5 (10 % solution)

Total Chloride Ion Content

< 0.10 %

Equivalent Sodium Oxide

< 16.0 %

 

Application

Application Information

Compatibility

SikaRapid®-800 P may be combined with many other Sika products like Sika® ViscoCrete®. To adjust begin of setting, the addition of a retarder is recommended.
Note: Always conduct trials before combining products in specific mixes and contact Sika technical service for information and advice about any specific combinations.

Dispensing

SikaRapid®-800 P is added to the dry mix.
Consumption

Recommended Dosage

Up to 5 % by weight of cement (according to the target accelerating effect)
Note: Preliminary testing is required to determine the exact dosage for specific conditions. Please contact Sika technical service for more information and advice.

Documents