Product Data Sheet Show all documents

SikaFiber®-6 PPF

FIBRILLATED MICRO-POLYMER FIBRE FOR USE IN DRY MORTAR AND CONCRETE

SikaFiber®-6 PPF is a special type of a synthetic micro-reinforcement. The typical application in mortar and concrete results in increased cohesion and stability in fresh concrete. Increased impact and shock resistance and reduced plastic shrinkage cracks in hardened concrete. SikaFiber®-6 PPF is not sensitive to alkalis.

  • Reduces cracks by plastic and/or drying shrinkage
  • Increased resistance to shock, impact and wear stress
  • Easy to handle and dose
  • Improvement of cohesion in the fresh mortar/concrete
  • Improved green strength
  • No corrosion
  • High tensile strength
  • Higher durability
Safety Data Sheet
Product Data Sheet Show all documents

Usage

  • Dry mortar and dry concrete
  • Screed
 

Advantages

  • Reduces cracks by plastic and/or drying shrinkage
  • Increased resistance to shock, impact and wear stress
  • Easy to handle and dose
  • Improvement of cohesion in the fresh mortar/concrete
  • Improved green strength
  • No corrosion
  • High tensile strength
  • Higher durability

Packaging

0.6 kg in biodegradable paper bags, 25 bags in cardboard box, 30 boxes on pallet

Colour

Fibrillated

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

Complies with DIN EN 14889-2, Class Ib
Product Information

Composition

Polypropylene

Shelf life

Minimum of 2 years in sealed packaging.

Storage conditions

Store in dry conditions between 5° and 30°C. Protect from direct sunlight, water and dirt.

Density

0.91 g/cm³ at +20°C

Dimensions

length [mm]: 6

diameter [µm]: 45 x 550

Melting point

165°C

Ignition temperature

Approx. 600 °C

 
Technical Information

Resistance to alkalinity

high

Application

Application Information

Compatibility

SikaFiber®-6 PPF reinforced mortar and concrete can be pumped, installed, compacted and smoothed off with the customary equipment and processes.

Dispensing

SikaFiber®-6 PPF is added to the dry mix in dry mortar plant, preferably with the aggregate.
Consumption

Recommended dosage

600 g per m³ of fresh mortar and fresh concrete and/or 300 g per tonne of dry mortar and concrete.

Documents