Icoment® Spachtel

12 month

Store in cool and dry conditions. Protect from direct sunlight and frost.

1,7 kg/l

For external surfaces use Icoment® Spachtel filler only mixed with cement.

By layer thickness of about 2 mm or more, the Icoment® Spachtel cement mortar must be filled with fine sand.

This will depend on the site requirement and use of the product.

Minimum +5°C

Maximum +35°C

Minimum +5°C

Maximum +35°C

approx. 24 hours by 20°C

Coatings for use on Icoment® Spachtel must be materials suitable for use on an alkaline substrate. (e.g. Sikagard-680S BetonColor, Sikagard-675 W ElastoColor, Sikagard-550 W Elastic).

Prevent the freshly applied material from drying out too quickly, e.g. due to direct sunlight or wind; follow standard rules for the curing of cement based mortars.

Application as a mortar:

Icoment® Spachtel is applied using plastering/rendering techniques, with trowels, floats, scarpers etc. on apre-saturated, damp substrate. Any larger or deep holes / voids should be pre-filled with the Icoment® Spachtel or another suitable Sika repair mortar and then levelled. The maximum layer thickness per operation is 2 mm. Application in several layers is possible with careful dampening of each preceding substrate layer. Only finish the final layer to a smooth, dense surface.

Fresh mortar on tools and equipment can be cleaned with water. Hardened martar can only be removed mechanically.