Product Data Sheet
Show all documents

Sika® Corro Top Neu

Solvent-containing, 1-pack coating based on synthetic resin for steel and prime coated galvanizing

Aesthetically attractive, easy applicable coating with a smooth, glossy surface.

  • Quick-drying
  • Stackable
  • Excellent adhesion even on hard PVC, timber, old coatings, primed galvanized surfaces and aluminium
Product Data Sheet
Show all documents

Usage

Corrosion protection and colour design for steel or prime coated galvanized steel constructions, e.g. warehouse structures, machine parts, wall and ceiling cladding, doors, railings, for indoor and outdoor.  

Advantages

  • Quick-drying
  • Stackable
  • Excellent adhesion even on hard PVC, timber, old coatings, primed galvanized surfaces and aluminium

Packaging

Sika® CorroTop NEW12.5 kg net
Sika® CorroTop EG NEW12.5 kg net
Sika® Thinner B5 l

Colour

RAL and mio colour shades

Slight colour deviations are possible due to raw material characteristics.

Product Details

Product Information

Shelf life

1 year

Storage conditions

In originally sealed containers in a cool and dry environment.

Density

Sika® CorroTop NEW1.3 kg/l
Sika® CorroTop EG NEW1.3 kg/l

Solid content

By volume

By weight

Sika® CorroTop NEW~56 %~73 %
Sika® CorroTop EG 
NEW
~50 %
~69 %
Technical Information

Chemical resistance

Sika® CorroTop NEW and Sika® CorroTop EG NEW are resistant to weathering.

Temperature resistance

Dry heat up to max. + 100°C

Application

Application Information

Material temperature

Min. + 5°C

Relative air humidity

Max. 85 %, except the surface temperature is significantly higher than the dew point temperature, it shall be at least 3 K above dew point.

Waiting time to overcoating

At + 20°CMin. 12 h

Thinner

Sika® Thinner B

If necessary max. 3 % Sika® Thinner B may be added to adapt the viscosity.

Drying time

Final drying time

Depending on layer thickness and temperature final hardness is usually achieved within 1 week.

Drying stage 6

Sika® CorroTop New /

Sika® CorroTop EG New

Dry film thickness

60 μm

+ 5°C after

21 h

+ 23°C after10 h

Surface temperature

Min. + 5°C
Consumption

Consumption


Product


Sika® CorroTop NEW

Sika® CorroTop EG 
NEW
Dry film thickness

60 μm* 

60 μm*
Wet film thickness107 μm120 μm
Consumption0.139 kg/m20.156 kg/m2

* Max. dry film thickness: 120 μm
Application steps

SUBSTRATE PREPARATION

Ensure surfaces to be coated are clean, dry and free from all surface contamination such as oil, grease, dirt and corrosion products to achieve satisfactory adhesion.

For contaminated and weathered surfaces e.g. primed areas we recommend to clean with SikaCor® Wash.

Steel surfaces shall be blast-cleaned to Sa 2½ according to ISO 8501-1 (ISO 12944-4).

Hot-dip galvanized surfaces, copper, aluminium, hard PVC shall be prepared by degreasing.

Maintenance coatings: In case of well adhering old coating systems, careful cleaning is sufficient. Loose particles must be removed, corroded and defective areas must be prepared to PSa 2½, PMa or PSt 2 and patch-primed with Sika® CorroTop or SikaCor® Aktivprimer Rapid.

MIXING

Sika® CorroTop NEW and Sika® CorroTop EG NEW are supplied ready for use. Stir thoroughly prior to application.

APPLICATION

The method of application has a major effect on achieving uniform thickness and appearance. Spray application will give the best results. The indicated dry film thickness is easily achieved by airless spray. Adding solvents reduces the sag resistance and the dry film thickness. In case of application by roller or brush, additional applications may become necessary to achieve the required coating thickness, depending on type of construction, site conditions, colour shade etc. Prior to major coating operations a test application on site may be useful to ensure the selected application method will provide the requested results.

By brush and roller


Conventional high pressure spraying:

  • Nozzle size 1.5 - 2.0 mm
  • Pressure 3 - 5 bar


Airless-spraying:

  • Pressure min. 180 bar
  • Nozzle size 0.38 - 0.53 mm (0.015 - 0.021 inch)
  • Spraying angle 40° - 80°

CLEANING OF EQUIPMENT

Sika® Thinner B

 

Documents