SikaBond®-139 Filler Block

12 months from date of production

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +10°C and +25°C.

Always refer to packaging.

Shore hardness assists with material identification and assessing the curing progress on site.

Long-term resistant against:

• Water
• Sea water
• Limewater
• Neutral detergents

Short-term resistant against:

• Mineral oils, diesel fuel

Short-term or no resistance against:

• Organic solvents (ester, ketone, aromates), alcohol and thinners
• Concentrated lyes and acids

Contact Sika Technical Services for specific information.

min. - 40°C / max. + 90°C

Short-term up to + 150°C

min. +5 °C / max. +35 °C

min. +5 °C / max. +40 °C

min. 30 % / max. 90 %

Substrate temperature min. 3 °C above dewpoint

min. +5 °C / max. +35 °C

Dry

~1,3 kg per litre of volume

Substrate must be clean and dry, homogeneous, free from oils and grease, dust and loose or friable particles. Cement laitance, poorly adhering particles and incompatible paints must be removed.

To improve adhesion, apply Icosit® KC 330 Primer as a primer on absorbent substrates (concrete).

Waiting time between application of Icosit® KC 330 Primer and application of SikaBond®-139 Filler Block min. 1 hour and max. 3 days.

Mixing and application tools must be cleaned at regular intervals and immediately after use with Sika® Reinigungsmittel-5. Hardened material can only be removed mechanically.