Show all documents

SCHÖNOX® AM

Very low emission, calcium sulphate based smoothing and levelling compound

especially suitable for all calcium sulphate based subfloors as well as mastic asphalt screeds according to EN 13 813. Also for interior use on cementitious subfloors. After adding 6.0 l water for 25.0 kg powder, SCHÖNOX AM is ready for use.

EMICODE EC 1PLUS: very low emission
RAL UZ 113: Environment-friendly, because very low-emission
for interior use
self-levelling
high level of hardness and strength
very smooth application
suitable for application on subfloor heating systems
synthetic resin-modified
layer-thickness 1,0 to 20 mm without aggregates
layer-thickness 10 to 30 mm with aggregates
short waiting time after priming
pumpable
low tension/stress
free of cracks even in thicker layers
suitable for castor wheels loading with layer-thickness more than 1,0 mm according to EN 12 529
low porosity surface

Show all documents

Usage

SCHÖNOX AM is suitable for filling, smoothing, evening and levelling of substrates:

under textile and elastic coverings as well as parquet
in interior areas.

for full-surface levelling under parquet, layer thickness at least 2 mm. Only in combination with elastic SCHÖNOX parquet adhesives. Drying time must be observed.

Advantages

EMICODE EC 1PLUS: very low emission
RAL UZ 113: Environment-friendly, because very low-emission
for interior use
self-levelling
high level of hardness and strength
very smooth application
suitable for application on subfloor heating systems
synthetic resin-modified
layer-thickness 1,0 to 20 mm without aggregates
layer-thickness 10 to 30 mm with aggregates
short waiting time after priming
pumpable
low tension/stress
free of cracks even in thicker layers
suitable for castor wheels loading with layer-thickness more than 1,0 mm according to EN 12 529
low porosity surface