Show all documents

SCHÖNOX® HS 10 F

Rapid setting fiber reinforced hybrid floor leveling compound with Hybrid Active Dry Technology

Combines the advantages of a low tension calciumsulphate based leveling compound with the fast drying of cementitious systems. Embedded fibres provide reinforcement, making it unnecessary to use a reinforcing mat. Especially suitable for wood floor boards, chipboards, OSB-boards, mastic asphalt screeds and other critical substrates. Because of the innovative Hybrid Active Dry Technology it is ready for covering already after 6 hours.

EMICODE EC 1PLUS: very low emission
RAL UZ 113: Environment-friendly, because very low-emission
quickly ready for covering through high water binding capacity
fast developement of strength
with synthetic fibres
ready for foot traffic after approx. 2 hours
layer-thickness 3 to 20 mm
high level of hardness and strength
high flexural strength
suitable for application on subfloor heating systems
ideal in combination with Sika coatings
self-levelling
pumpable
low tension/stress
highly synthetic-resin modified
easy to handle
suitable for castor wheels in accordance with EN 12 529
low porosity surface
crackbridging
for interior use

Show all documents

Usage

SCHÖNOX HS 10 F is suitable for filling, smoothing, evening and levelling of substrates:

under textile and elastic coverings as well as parquet
in combination with lamina panel heatings (warmwater or electrical), e.g. Uponor or Magnum
in interior areas.
for full-surface levelling under sealings and coatings (Note the system design in combination with Sika coatings)