Show all documents

SCHÖNOX® ZM RAPID

Rapid setting, cement based self-levelling compound with very low emissions

for almost all substrates suitable for laying. For repairings and renovation work in interior areas. Many types of covering can be laid after approximately 90 minutes. The self levelling compound has a very low shrinkage and a good absorptivity. Extendable with sand.

EMICODE EC 1PLUS: very low emission
for interior use
self-levelling
ready for covering after approx. 1,5 - 2 hours for many types of coverings
suitable for application on subfloor heating systems
ideal in combination with Sika coatings
high level of hardness and strength
layer-thickness 1,0 to 10 mm without aggregates
layer-thickness 5 to 25 mm with aggregates
pumpable
extendable without loss of strength for higher layer thickness
suitable for castor wheels loading with layer-thickness more than 1,0 mm according to EN 12 529
for forklift truck traffic, layer-thickness at least 3 mm
low porosity surface
low in chromate according to REACH

Show all documents

Usage

SCHÖNOX ZM RAPID is suitable for filling, smoothing, evening and levelling of substrates:

under textile, elastic and ceramic coverings
for full-surface levelling under parquet, layer thickness at least 2 mm (drying time at least 12 hours)
for full-surface levelling under coloured sealings and coatings with forklift truck traffic, layer thickness at least 3 mm (drying time at least 12 hours)
in interior areas.
for full-surface levelling under sealings and coatings (Note the system design in combination with Sika coatings)

Advantages

EMICODE EC 1PLUS: very low emission
for interior use
self-levelling
ready for covering after approx. 1,5 - 2 hours for many types of coverings
suitable for application on subfloor heating systems
ideal in combination with Sika coatings
high level of hardness and strength
layer-thickness 1,0 to 10 mm without aggregates
layer-thickness 5 to 25 mm with aggregates
pumpable
extendable without loss of strength for higher layer thickness
suitable for castor wheels loading with layer-thickness more than 1,0 mm according to EN 12 529
for forklift truck traffic, layer-thickness at least 3 mm
low porosity surface
low in chromate according to REACH