Show all documents

SCHÖNOX® PL PLUS

Ready mixed repair mortar for use from 3 - 30 mm 

sturdy, resin-modified cement based repair mortar for filling holes on walls and floors. Quickly ready for laying. Consumption reduction by 30 % due to use of lightweighted fillers. High physical properties. Little shrinkage. For internal and external application.

  • EMICODE EC 1PLUS: very low emission
  • sturdy
  • flexible
  • ready for laying after approx. 2 hours
  • contains lightweighted fillers
  • very low consumption / very high coverage
  • waterproof
  • frost resistant
  • rapid setting and hardening
  • suitable for application on subfloor
  • heating systems
  • low tension/stress
  • synthetic resin-modified
  • layer-thickness 3 to 30 mm without aggregates
  • low in chromate according to REACH
Show all documents

Usage

SCHÖNOX PL PLUS is suitable for patching, filling, repairing and levelling:

  • of subfloors under self levelling SCHÖNOX floor levelling compounds
  • under ceramic coverings and natural stones
  • of staircase steps and platforms
  • as a repairing mortar for filling holes and deepenings
  • for forming sloping screeds

SCHÖNOX PL PLUS is used in particularly for full-surface levelling:

  • on balconies and terraces
  • in wet areas
  • in swimming pools

In outdoor and wet areas is SCHÖNOX PL PLUS be protected by a SCHÖNOX waterproofing membrane and tiles.

Advantages

  • EMICODE EC 1PLUS: very low emission
  • sturdy
  • flexible
  • ready for laying after approx. 2 hours
  • contains lightweighted fillers
  • very low consumption / very high coverage
  • waterproof
  • frost resistant
  • rapid setting and hardening
  • suitable for application on subfloor
  • heating systems
  • low tension/stress
  • synthetic resin-modified
  • layer-thickness 3 to 30 mm without aggregates
  • low in chromate according to REACH

Packaging

Material No. 483238
EAN 4015447008376
Packsize 25.0-kg-sack
Packaging unit 42/pallet

Documents