Show all documents

SCHÖNOX® SPF

Very low stress, fibre-reinforced levelling compound with high flexural tension

in combination with ceramic coverings and natural stones because of the embedded fibres ideal for restructuring and renovation. SCHÖNOX SPF is ideal in combination with the power reinforcement SCHÖNOX PZG. SCHÖNOX SPF is suitable in combination with lamina panel heatings (warmwater or electrical), e.g. Uponor or Magnum. For interior use.

EMICODE EC 1PLUS: very low emission
for interior use
with synthetic fibres
crackbridging
self-levelling
low consumption / high coverage
ready for foot traffic after approx. 3 hours
high flexural strength
high strength values
highly synthetic-resin modified
easy to handle
pumpable
low tension/stress
layer-thickness 3 to 20 mm without aggregates
suitable for application on subfloor heating systems
suitable for thin-layer floor heatings
suitable for castor wheels in accordance with EN 12 529
low in chromate according to REACH

Show all documents

Usage

SCHÖNOX SPF is suitable for filling, smoothing, evening and levelling of substrates:

Under ceramic coverings and natural stones
In combination with SCHÖNOX uncoupling systems (SCHÖNOX EDP)
Ideal in combination with thin-layer floor heating systems according to BVF guidelines (e.g. Uponor MiniTec, Roth Climacomfort, Blanke Permatop SF, Kermi xnet C16 und C 17 System, Lofec Flächenheizung, hicoTHERM) in wet rooms
SCHÖNOX SPF needs to be protected by a SCHÖNOX water membrane and a tile covering.
In interior areas.