Show all documents

SCHÖNOX® TT S8

Highly dust reduced, flexible adhesive for floor tiles  

for nearly cavity-free laying of tiles and slabs by using as pourable mortar. SCHÖNOX TT S8 generates because of modern raw materials and innovative production technology appr. 90 % less dust while mixing. Especially for laying fully vitrified tiles. For interior and exterior use on floors. Optimised consumption because of the use of light-weight fillers.

  • appr. 90 % less dust while mixing
  • fulfills the C2 E S1 requirements according to EN 12004
  • frost resistant according to EN 12004
  • water-proof according to EN 12004
  • EMICODE EC 1PLUS: very low emission
  • Fulfills the requirments for flexible mortars according to the guideline of Deutsche Bauchemie
  • component of the SCHÖNOX BALTERRA®-system
  • contains SCHÖNOX CLIMATRIX® -technology
  • ideal for exterior use and high loaded areas
  • high durability against thermal stress
  • flexible
  • pourable
Show all documents

Usage

  • SCHÖNOX TT S8 is suitable for setting with an almost complete surface wetting of the tiles as far as possible with the thin-bed-method according to DIN 18 157 part 1 of:
  • ceramic coverings
  • fully vitrified tiles, especially large-sized
  • split clinker flags and floor quarry
  • cotto
  • mouldes slabs 
  • Flexible bonding slurry for setting ceramic tiles with the thick-bed and shaked method
  • natural, artificial and concrete stone slabs not sensitive to deformation
  • natural-, artificial- and cast stone tiles not sensitive to discolouration
  • ceramic tiles on substrates, where stress can occur
  • ceramic tiles on balconies and terraces
  • ceramic tiles on floors in commercial areas
  • ceramic tiles in swimming pools
  • uncoupling products, for example SCHÖNOX EDP, Schlüter Systems (Ditra 25, Ditra-Drain, Ditra-Heat), Blanke Permat and Gutjahr Flexbone

Advantages

  • appr. 90 % less dust while mixing
  • fulfills the C2 E S1 requirements according to EN 12004
  • frost resistant according to EN 12004
  • water-proof according to EN 12004
  • EMICODE EC 1PLUS: very low emission
  • Fulfills the requirments for flexible mortars according to the guideline of Deutsche Bauchemie
  • component of the SCHÖNOX BALTERRA®-system
  • contains SCHÖNOX CLIMATRIX® -technology
  • ideal for exterior use and high loaded areas
  • high durability against thermal stress
  • flexible
  • pourable

Packaging

Material No. 483298
EAN 4016447018634
Packsize 25.0-kg-sack
Packaging unit 42/pallet

Documents