Show all documents

SCHÖNOX® 2K DS RAPID

Rapid setting flexible 2-component cementitious membrane

for interior and exterior areas. With the addition of 12.5 kg of powder (dust reduced) to 5.0 kg dispersion, SCHÖNOX 2K DS RAPID is ready to use. SCHÖNOX 2K DS RAPID is waterproof and crackbridging. Officially approved test certificate. SCHÖNOX 2K DS RAPID is a component of SCHÖNOX BALTERRA® -system. SCHÖNOX 2K DS RAPID is based on a self crosslinking, special acrylate-dispersion.

EMICODE EC 1PLUS: very low emission
officially approved - no.:
P-5176/612/10-MPA BS
P-5086/767/11-MPA BS
P-5087/768/11-MPA BS

fulfills CM O2 P requirements according to EN 14891
fulfills the W0-I to W3-I requirements according to DIN 18534
fulfills the requirements W2-B, R1-B and S1-B to S3-B according to DIN 18535
self cross-linking, hydraulic rapid hardening
watertight
dust reduced
solvent-free
highly flexible
crackbridging
suitable for application on subfloor heating systems
frost resistant
shrinkage-optimized
consumption-optimized
diffusion permeable
high bonding strength
resistant against ageing
easy to apply
sprayable
component of the SCHÖNOX BALTERRA® -system
low in chromate according to REACH

Show all documents

Usage

SCHÖNOX 2K DS RAPID is especially suitable before the sealing:
on balconies and terraces
in highly loaded commercial wet rooms, such as shower rooms in sport halls, therapy rooms in hospitals and the like
also by the subsequent thickbed method with sprayed-on daub
in swimming pools and water basins in combination with ceramic coverings
SCHÖNOX 2K DS RAPID meets the requirements for membranes in the leaflet „Hinweise für die Ausführung von Abdichtungen im Verbund mit Bekleidungen und Belägen aus Fliesen und Platten für den Innen- und Außenbereich“ and the leaflet „Keramische Beläge im Schwimmbadbau - Hinweise für Planung und Ausführung“.
SCHÖNOX 2K DS RAPID is authorized by the German building supervision for the preparation of bonded sealings in highly loaded wet areas in the moisture loading classes A and B according „Verwaltungsvorschrift Technische Baubestimmungen (WTB) lfd. Nr. C 3.27“.
The impermeability to water when installed has been tested together with the SCHÖNOX system components in accordance with test principles for mineral-based waterproofing slurries (MDS) as well as for waterproof membranes combined with tiled finishes (AIV) up to a 1,5 bar and is acceptable for an installation depth up to 6,0 m.