Show all documents

SCHÖNOX® Q2

Dust reduced, normal setting flexible adhesive

especially for laying fully vitrified tiles, ceramic tiles and slabs by the thin-bed and mid-bed method. Suitable on walls and floors. As well as soft and construction boards. Suitable on floor heating systems. Meets requirments of the EN 12004 C2 TE. For floor and wall installations in interior and exterior areas

  • EMICODE EC 1PLUS: very low emission
  • fulfills the C2 TE requirements according to EN 12004
  • -23 % CO2 Emissions
  • frost resistant according to EN 12004
  • water-proof according to EN 12004
  • dust reduced
  • suitable for vitrified tiles
  • flexible
  • sturdy
  • suitable for application on subfloor heating systems
  • synthetic resin-modified
  • long open time
  • layer-thickness up to 10 mm
  • possible to level out
  • low in chromate according to REACH
Show all documents

Usage

SCHÖNOX Q2 is suitable for setting with the thin- and middle-bed-method of:

  • ceramic coverings
  • fully vitrified tiles
  • stoneware tiles
  • stoneware mosaic
  • earthenware tiles
  • cotto
  • hand-made slabs split clinker flags and floor quarry
  • natural, artificial and concrete stone slabs not sensitive to deformation
  • natural-, artificial- and cast stone tiles not sensitive to discolouration
  • soft and construction boards

Advantages

  • EMICODE EC 1PLUS: very low emission
  • fulfills the C2 TE requirements according to EN 12004
  • -23 % CO2 Emissions
  • frost resistant according to EN 12004
  • water-proof according to EN 12004
  • dust reduced
  • suitable for vitrified tiles
  • flexible
  • sturdy
  • suitable for application on subfloor heating systems
  • synthetic resin-modified
  • long open time
  • layer-thickness up to 10 mm
  • possible to level out
  • low in chromate according to REACH

Packaging

Material No. 487540
EAN 4016447023751
Packsize 25.0-kg-sack
Packaging unit 42/pallet

Documents