Sika Comfortfloor® PS-64
Sika Comfortfloor® PS-64 is a liquid-applied elastic polyurethane self-smoothening flooring system and is part of the Sika Comfortfloor® decorative flooring range.
Sika Comfortfloor® PS-64 is an ergonomic, sound dampening, low emission floor which is UV stable, highly aesthetical, easy to care for and to maintain while consisting an acoustic thick layer.
Sika Comfortfloor® PS-64 is especially designed for indoor applications where high comfort under feet, individual design, a jointless surface and soft footfall are required.
- Low VOC emission
- Flexible and resilient
- Good acoustic isolation
- Good mechanical resistance
- Good UV resistance
- Reduces footfall sound
- Attractive colours available using pigmented UV stable base coat
- Non shrinking after cure
- High strength
- Low maintenance and life cycle cost
- Tough, durable and seamless floor
Systemstruktur
Anwendung
- Commercial and public buildings
- Healthcare facilities
- Schools
- Retail spaces & laboratories
- Nursing facilities
- Showrooms & lobbies
- Museums and office space.
Vorteile
- Low VOC emission
- Flexible and resilient
- Good acoustic isolation
- Good mechanical resistance
- Good UV resistance
- Reduces footfall sound
- Attractive colours available using pigmented UV stable base coat
- Non shrinking after cure
- High strength
- Low maintenance and life cycle cost
- Tough, durable and seamless floor
Verpackung
Please refer to the individual Product Data Sheets
Farbsystem
Available in almost unlimited choice of colour shades.
Aussehen System
Smooth, matt finish
Systemdetails
UMWELTINFORMATIONEN
- Emission tested according to the AgBB-scheme and guidelines of the DiBt (AgBB – Committee for Health related Evaluation of Building Products, DiBt – German Institute for Building Technology). Sampling, testing and evaluation were performed according to ISO-16000
PRÜFZEUGNISSE
- Synthetic resin screed material according to EN 13813:2002, Declaration of Performance and provided with the CE mark
- Reaction to Fire classification according to DIN EN 13501-1.
- Impact sound reduction according EN ISO 140-8
- Castor wheel suitability according to EN 425
- Residual indentation according to EN 433
- Cleanroom® suitable material, top coat tested for particle emission and biological resistance. Fraunhofer IPA, Germany report no. SI 1008-533
Lagerfähigkeit
Please refer to the individual Product Data Sheets
Lagerbedingungen
Please refer to the individual Product Data Sheets
Systemaufbau
Sika Comfortfloor® PS-64
| Layer | Product |
| 1. Primer | Sikafloor®-156/-161/-701 |
| 2. Acoustic layer | Sikafloor®-320 |
| 3. Base coat | Sikafloor®-3000 |
| 4. Top coat | Sikafloor®-304 W |
As optional primers Sikafloor®-144/-159/-160 can be used. Please refer to the individual Product Data Sheet.
As optional base coat Sikafloor®-300 can be used. Note that the approvals on emissions will be affected. Please refer to the individual Product Data Sheet.
Chemische Basis System
Polyurethane
Nenndicke System
~ 6 mm
VOC-Gehalt
Very low content of Volatile Organic Compounds. It fulfils the stringent demands for indoor air quality and low VOC emitting products AgBB
Shore-Härte (A)
| ~ 84 (14 days /+23 °C) | (DIN 53505) |
Castor chair resistance
No damage (25000 cycles) | (EN 425:1994) |
Widerstand gegen stoßartige Belastung
Class I | (ISO 6272) |
Eindruckverhalten
0.10 mm | (EN 433:1994) |
Reißfestigkeit
~ 1.0 N/mm² (14 days/+23°C/Base coat) | (DIN 53504) |
Haftzugfestigkeit
> 1.5 N/mm2 | (EN 13892-8) |
Weiterreißwiderstand
~ 11 N/mm (Base coat) | (ISO 34-1) |
Brandverhalten
Cfl-s1 | (EN 13501-1) |
Chemische Beständigkeit
Sika Comfortfloor® PS-64 always has to be sealed with Sikafloor®-304 W. Refer to the chemical resistance of Sikafloor®-304 W.
USGBC LEED Bewertung
Conforms Section EQ (Indoor Environmental Quality), Credit 4.2 Low-Emitting Materials Paints and Coatings. Calculated VOC content ≤ 50 g/l
Schallisolierung
12 dB | (EN ISO 140-8) |
Rutschhemmung
R 10 | (DIN 51130) |
Anwendung
Materialtemperatur
+15 °C min. / +30 °C max.
Lufttemperatur
+15 °C min. / +30 °C max.
Relative Luftfeuchtigkeit
80 % max.
Taupunkt
Beware of condensation!
The substrate and uncured floor must be at least 3°C above dew point to reduce the risk of condensation or other disturbance of the surface on the floor finish
Untergrundtemperatur
+15 °C min. / +30 °C max.
Untergrundfeuchtigkeit
Sika Comfortfloor® PS-64 can be installed on substrates with moisture content of max. 4% (checked by Tramex). The substrate needs to be visibly dry and have adequate pull-off strength min 1.5 N/mm2. Check rising moisture.
Wartezeit bis zur Nutzung
| Temperature | Foot traffic | Light traffic | Full cure |
| +15 °C | ~ 30 hours | ~ 48 hours | ~ 6 days |
| +20 °C | ~ 16 hours | ~ 24 hours | ~ 4 days |
| +30 °C | ~ 12 hours | ~ 18 hours | ~ 3 days |
Note: Times are approximate and will be affected by changing ambient and substrate conditions
Materialverbrauch
| Layer | Product | Consumption |
| 1. Primer | Sikafloor®-156/-161/-701 | ~0.4 kg/m²/layer |
| 2. Acoustic layer | Sikafloor®-320 | ~3.5 kg/m2 |
| 3. Base coat | Sikafloor®-3000 | ~2.8kg/m2 (2 mm) |
| 4. Top coat | Sikafloor®-304 W | ~0.13 kg/m2/layer |
Consumptions are theoretical and do not include any wastage or additional materials needed due to porosity, substrate profile etc.
CLEANING
Please refer to the Sikafloor®‐ Cleaning Regime