Sika Comfortfloor® PS-24
Sika Comfortfloor® PS-24 is a UV resistant, high elastic polyurethane self-smoothening flooring system and is part of the Sika Comfortfloor® decorative flooring range. Sika Comfortfloor® PS-24 is suitable for indoor applications, decorative areas where high comfort under feet, and soft footfall are required in combination with aesthetic design options. Sika Comfortfloor® PS-24 has been designed to meet the need for individual and decorative design in commercial, retail and leisure facilities using coloured chips, aggregates and other special fillers.
- Highly decorative
- Soft footfall
- Comfortable
- Odourless
- Good resistance to fire
- Low VOC content
- Crack-bridging
- Silky matt finish
- Good mechanical and abrasion resistance
- Easy application
- Easy to keep clean and maintain
Systemstruktur
Anwendung
- Healthcare – Medical sector
- Education (e.g. Schools and Universities)
- Leisure & Culture (e.g. Museums, Libraries)
- Retail, Commercial & Public Buildings
- Residential, showrooms, entrance halls, lobbies, open-plan offices
Vorteile
- Highly decorative
- Soft footfall
- Comfortable
- Odourless
- Good resistance to fire
- Low VOC content
- Crack-bridging
- Silky matt finish
- Good mechanical and abrasion resistance
- Easy application
- Easy to keep clean and maintain
Verpackung
Please refer to the individual Product Data Sheets
Farbsystem
Available in almost unlimited choice of colour shades.
Aussehen System
Smooth, matt finish
Systemdetails
UMWELTINFORMATIONEN
- Eurofins Emission tested according to the AgBB-scheme and guidelines of the DiBt (AgBB – Committee for Health-related Evaluation of Building Products, DiBt – German Institute for Building Technology). Sampling, testing and evaluation were performed according to ISO-16000, Report No. 392-2014-00156502_02.
- Conformity with LEED v2009 IEQc 4.2: Low-Emitting Materials - Paints and Coatings
PRÜFZEUGNISSE
- Fire classification according to EN 13501-1, Test institute Universiteit Gent Germany, Report No. 14-529
- Cleanroom® suitable material as part of the Sika ComfortFloor® Decorative system for particle emission and biological resistance. Fraunhofer IPA, Germany report no. SI 1008-533
- Impact sound reduction according EN ISO 140-8, test report 102-B-08, Iba Institut Gottfried & Rolof Germany.
- Determination of wear resistance EN 651:2004 , indentation EN 433:2004 and effect of simulated movement of furniture leg according EN 424:2002 reports 391581-02 TFI institute Aachen Germany
- M1 emission class approved by RTS Finland
- Synthetic resin screed material according to EN 13813:2002, Declaration of Performance and provided with the CE mark
- Surface protection coating for concrete according to EN 1504-2:2004, Declaration of Performance and provided with the CE mark
Lagerfähigkeit
Please refer to the individual Product Data Sheets
Lagerbedingungen
Please refer to the individual Product Data Sheets
Systemaufbau
Sika Comfortfloor® PS-24
| Layer | Product |
| 1. Primer | Sikafloor®-156/-161/-701 |
| 2. Base coat | Sikafloor®-3000 + PVA flakes broadcast |
| 3. Top coat | Sikafloor®-304 W |
As optional primers Sikafloor®-144/-159/-160 can be used. Please refer to the individual Product Data Sheet.
As optional base coats Sikafloor®-300 can be used. Note that the approvals on emissions will be affected. Please refer to the individual Product Data Sheet.
Chemische Basis System
Polyurethane
Nenndicke System
~2–4 mm
VOC-Gehalt
Very low content of Volatile Organic Compounds. It fulfils the stringent demands for indoor air quality and low VOC emitting products AFFSET, M1, AgBB, EMICODE and A+.
Shore-Härte (A)
| ~84 (14 days / +23 °C) | (DIN 53505) |
Resistance to Wearing
Wearing group P | (EN 660-2:1999) |
Verschieben eines Möbelfußes
No damage | (EN 424:2002) |
Castor chair resistance
No damage (25000 cycles) | (EN 425:1994) |
Widerstand gegen stoßartige Belastung
Class I (~ 4 N/m) | (ISO 6272) |
Eindruckverhalten
0.02 mm | (EN 433:1994) |
Reißfestigkeit
| ~8.0 N/mm² (14 days / +23 °C / Base coat) | (DIN 53504) |
Haftzugfestigkeit
> 1.5 N/mm2 | (EN 13892-8) |
Weiterreißwiderstand
| ~18 N/mm (14 days / +23 °C / Base coat) | (ISO 34-1) |
Brandverhalten
Bfl-s1 | (EN 13501-1) |
Zigartettenglutbeständigkeit
Class 4 | (EN 1399) |
Chemische Beständigkeit
Sika Comfortfloor® PS-24 always has to be sealed with Sikafloor®-304 W. Refer to the chemical resistance of Sikafloor®-304 W.
USGBC LEED Bewertung
Conforms Section EQ (Indoor Environmental Quality), Credit 4.2 Low-Emitting Materials Paints and Coatings. Calculated VOC content ≤ 50 g/l
Schallisolierung
2 dB | (EN ISO 140-8) |
Rutschhemmung
R 10 | (DIN 51130) |
Anwendung
Materialtemperatur
+15 °C min. / +30 °C max.
Lufttemperatur
+15 °C min. / +30 °C max.
Relative Luftfeuchtigkeit
80 % max.
Taupunkt
Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or other disturbance of the surface on the floor finish
Untergrundtemperatur
+15 °C min. / +30 °C max.
Untergrundfeuchtigkeit
Sika Comfortfloor® PS-24 can be installed on substrates with moisture content of max. 4% (checked by Tramex). The substrate needs to be visibly dry and have adequate pull-off strength min 1.5 N/mm2. Check rising moisture.
Wartezeit bis zur Nutzung
| Temperature | Foot traffic | Light traffic | Full cure |
| +15 °C | ~ 30 hours | ~ 48 hours | ~ 6 days |
| +20 °C | ~ 16 hours | ~ 24 hours | ~ 4 days |
| +30 °C | ~ 12 hours | ~ 18 hours | ~ 3 days |
Note: Times are approximate and will be affected by changing ambient and substrate conditions
Materialverbrauch
| Layer | Product | Consumption |
| 1. Primer | Sikafloor®-156/-161/-701 | ~0.3–0.5 kg/m²/layer |
| 2. Base coat | Sikafloor®-3000 + PVA flakes broadcast | ~2.8 kg/m2 (2 mm) (optional) |
| 3. Top coat | Sikafloor®-304 W | ~0.13 kg/m2/layer |
Consumptions are theoretical and do not include any wastage or additional materials needed due to porosity, substrate profile etc.
CLEANING
Please refer to the Sikafloor®‐ Cleaning Regime